2020 Western Snow Plows Impact™ V-Plow
- Year 2020
- Make Western Snow Plows
- Model Impact™
2020 Western Snow Plows Impact™ V-Plow
Big plow performance for your UTVWinter knows no limits—which means you shouldn't either. Built exclusively for utility vehicles, the WESTERN® IMPACT™ UTV snow plows are professional-grade plows built to go anywhere that demands WESTERN-grade performance. Constructed from high-strength, low alloy steel components, both models feature an easy-on/easy-off UTV mounting system and removable receiver brackets for exceptional ground clearance. IMPACT UTV plows feature Scrape Lock for clean scraping and back dragging.
Features may include:
UTV Mounting system- Hooking up the IMPACT™ v-plow or straight blade is simple. With the receiver brackets installed on your utility vehicle, either drive in or manually push the plow into the receivers. Push up on the headgear to engage the hitch pins in the receiver holes, then slide the handle to lock the hitch pins in place. Finally, connect the electrical plug.
- Detaching the plow is just as easy. The receivers are removable, to maintain ground clearance.
- The removable receivers and low profile undercarriage provide exceptional ground clearance and maximize the ramp angle, so your unit will be trail ready when the plow is not attached.
- We manufacture our own hydraulic components to ensure the highest standards of quality and reliability, so that you get a hydraulics system that's not only fast and responsive, but that's built to last season after season.
- Fully enclosed components are protected from the elements.
- Hydraulic Scrape Lock holds the blade down for more efficient scraping and clean back dragging.
- The IMPACT™ straight blade UTV plow features a 14-gauge powder coated steel moldboard that is 6' wide and comes with a standard 5" steel cutting edge.
- Four vertical ribs and high-strength, low-weight, alloy steel components ensure the plow is strong enough for commercial operation and light enough to fit more UTVs.
- Two heavy-duty coil springs protect your plow and UTV by allowing the whole blade to trip when striking obstacles.
- The IMPACT™ flared v-plow blades go from a 25¼" center height to a full 29¼" at the outer edge. The 14-gauge powder coated steel flared moldboard is 6' wide and comes with a standard 5" high-carbon steel cutting edge, reducing wear and extending the life of the blade.
- Six vertical ribs, coupled with high-strength, low-weight, alloy steel components provide a favorable strength-to-weight ratio, keeping stress off of the UTV frame.
- A 3/4" diameter, steel center pin resides within a three-connection-point hinge, keeping the wings tight for improved performance.
- Each blade features independent trip-edge design with heavy-duty coil springs for protection when encountering bumps and obstacles. Whether in V, scoop or straight blade configuration, the trip-edge helps protect the plow, the truck and the operator. Since only the edge trips, snow remains in front of the blade, so you can keep going without spilling the entire load of snow.
- A standard feature on the IMPACT™ UTV v-plow, UltraLock double-acting cylinders allow the operator to use the v-plow in straight blade mode by locking the wings together instead of having to toggle each wing independently.
Dimensions
Dimensions
Blade Gauge: 14 | Angling Rams: 1" x 8 ¾"
Width
Blade: 6' | Plowing full angle: 5' 0" full angle / 4' 7" scoop / 5' 0" full V
Height
Blade: 29 ¼" at end / 25 ¾" at hinge
Lift Cylinders
1½" x 6"
Cutting Edge Size
¼" x 5"
Capacities
Cargo Capacity
Snow: 21 yd
Weights
Weight
Approx less mount: 354 lb
Features
Features
Trip Springs: 2 | Vertical Ribs: 6 | Mount Type: UTV Mounting System